Effects of Sb doping on the structure and properties of SnO2 films

Transparent heat-insulating SnO₂ films were prepared on the glass substrate with sol-gel. The effects of Sb doping on the structure and photoelectric properties of the films were investigated. The films were characterized by scanning electron microscope (SEM), X-ray diffractometer (XRD), X-ray photoelectron spectroscopy (XPS), Ultraviolet–Visible-Near Infrared Spectrometer (UV-VIS-NIR) and Hall Effect tester. The results show that the doping of Sb did not change the basic crystal structure of the SnO₂ film, but reduced the crystallinity of the film. With the increase of Sb doping, the grain size decreases first and then maintains basically invariable. The sheet resistance of the film decreases first and then increases. The transmittance of the substrate glass coated with this film (hereinafter referred to as the film's transmittance) in the near-infrared region (780–2500 nm) decreases from 92.55% to 60.48%, and increases a little when the doping amount exceeded 11 mol%. And its transmittance of visible light (380–780 nm) fluctuated slightly between about 81% and 86%.     

Edge-enriched graphene with boron and nitrogen co-doping for enhanced oxygen reduction reaction

Carbon-based electrocatalysts for oxygen reduction reaction (ORR), especially in anion exchange membrane fuel cells (AEMFCs), have received a lot of attention because they exhibit excellent stability and are comparable to commercial Pt/C catalysts. Currently, to maximize the catalytic activity of carbon-based electrocatalysts, there are two major strategies: heteroatom doping or exposing active edge sites. However, the approach of increasing heteroatomic dopants of active edge sites has been rarely addressed. In this study, we present a simple strategy to prepare edge-enriched graphene catalysts with an increased ratio of heteroatomic dopants suitable for ORR of AEMFCs. The catalysts were prepared under harsh oxidation conditions, followed by a simple co-doping process with boron and nitrogen. The ORR activity of the catalysts was observed to be related to an increase of edge sites with heteroatomic dopants. We believe that the edge-enriched structure leads to accelerated electron transfer with enhanced oxygen adsorption.     

Recent advances on the use of active anodes in environmental electrochemistry

Active anodes, especially those consisting of metal mixed oxides (MMOs) containing Ru and/or Ir oxides, have been applied in the treatment of wastewater, especially when chloride ions are present. Their characteristics continuously drive the study of applications of these materials, be they in the degradation of different organic molecules, the preparation of new electrode materials and in the association of various processes to increase pollutant removal. Thus, this brief review aims to present some of the recent advances in the application of active anode materials in environmental electrochemistry. Focussing on the 2018–2020 period, it is possible to note many applied studies, using commercially available materials, covering a wide range of target pollutants. Still other studies aim to modify the catalyst surfaces to increase the mineralization capacity, and the use of these anodes in the production of free chlorine species to mediate indirect organic reduction is observed.     

Microextraction of metal ions based on solidification of a floating drop: Basics and recent updates

This review provides a comprehensive evaluation of solidified floating organic drop microextraction (SFODME) procedures for metal ions preconcentration and their contributions to green chemistry. In this article we focused on the modifications that have been performed in the recent years to improve this environmentally friendly procedure. Among the most important of these modifications are the inclusion of ultrasonic energy, vortex and air agitation to enhance the dispersion process. The article also discussed new challenges in the procedure by using more ecofriendly solvents as extractants such as ionic liquids, deep eutectic. and supramolecular solvents. The coupling of SFODME with solid phase extraction increases selectivity and efficiency of the preconcentration procedure.     

Fused vs. spiro: Kinetic,not thermodynamic preference may direct the reaction of α-carbonyl oxonium ylides

Rh(II)-catalyzed decomposition of certain cyclic α-diazocarbonyl compounds in the presence of cyclic ethers has been shown to give bicyclic ring expansion products. These are thought to arise from a [1,4]-alkyl shift toward the carbonyl oxygen atom and are in contrast with the recently observed spirocyclic products of a Stevens-type [1,2]-alkyl shift within the postulated oxonium ylide intermediate. Quantum chemical calculations performed at the B3LYP/6-31G* level of theory showed that the former reaction pathway (toward fused bicycles) is kinetically preferred.     

Spectroscopic characterization of core and shell regions in monolayer protected gold nanoparticles

We report studies on the structure of the metallic core and the alkyl cap layer in monolayer protected gold nanoparticles having sizes down to 1.6 nm. These particles are obtained by laser ablating gold targets in alkane-thiol solutions at different concentrations. The electronic structure of gold core and the vibrational properties of the capping hydrocarbon chains reveal effects connected with the nanosized nature of the particles.     

中药白茅根中金属元素的含量测定

火焰原子吸收光谱法测定中草药白茅根茎部的Fe、Cu、Zn、Mn、Ca、Mg,方法简单、精密度好、回收率在92.0%-104.4%之间,相对标准偏差(RSD)小于1.8%,结果令人满意.     

均苯三甲酸铕及铕镧配合物的合成及荧光性质

以均苯三甲酸为配体,水热条件下合成了均苯三甲酸铕及铕镧系列发光配合物La_xEu_1-x(BTC)·nH₂O(x=0,0.1,0.3,0.5,0.7,0.9),通过元素分析及化学滴定法测定了配合物的组成。用红外光谱对其进行了表征,确定了该系列配合物的组成为La_xEu_1-x(BTC)·nH₂O。研究了系列配合物的荧光性质,荧光光谱表明:该类配合物均能发出强的铕离子的特征荧光,并且镧元素的掺入能增强铕配合物的发光强度,但发射峰的位置基本上没有变化;其中⁵D₀→⁷F₁和⁵D₀→⁷F₂的跃迁发射较强,且均劈裂为两个峰(587,593nm)和(611,618nm),这是由于铕离子所处的配位环境引起的。     

Reciprocating sliding wear behavior of laser-clad small amplitude Mo2Ni3Si/NiSi metal silicide composite coatings

Mo₂Ni₃Si/NiSi metal silicide composite coatings with a fine microstructure consisting of Mo₂Ni₃Si primary dendrites and the interdendritic Mo₂Ni₃Si/NiSi eutectics were fabricated on austenitic stainless steel AISI 321 by laser cladding process. Small amplitude reciprocating sliding wear resistance of the coatings is evaluated as functions of normal load and slip amplitude and the wear mechanisms were discussed based on worn surface morphology observations. Results showed that the Mo₂Ni₃Si/NiSi coatings have excellent small amplitude reciprocating sliding wear resistance.